Integrated wall panel* starts with aluminum composite panel + filler. The disadvantage of this integrated wall panel is that it will weaken electricity, easily deform, and shield the signal. These three are the main disadvantages. In addition, there is metal radiation, and the aluminum layer oxidizes these small defects. .

 

 

 

Bamboo wood fiber integrated wall panels are new integrated wall panels for these problems. Bamboo wood fiber integrated wall surface is made of bamboo powder, wood powder, light calcium carbonate, PVC, polymer resin and other accessories. A little bit high hardness, impact resistance, toughness, waterproof, moisture, mildew, termite prevention. Installation aspect Installation is quick. Generally, the effect can be high in 5 days. The wall can be customized. After the rough room is connected to the water and electricity, you can directly install the wallboard and save a lot of money. Some people say that effective flame retardant, I think that flame retardant is not an advantage. Flame retardant grade B1 can only be said to meet the standard. It is not good flame retardant. In addition, the integrated wall of bamboo fiber is not absolutely environmentally friendly. The surface coating still needs glue, and there is formaldehyde in the place where there is glue. However, compared with other wall art materials, it is absolutely within the environmental protection standard, and the content is much lower and almost non-toxic.

 

 

 

At present, my personal concerns about bamboo fiber are:

 

 

 

1, the flame retardant is not high. Although it is not easy to catch fire when it encounters an open flame, it is easy to bake black. Therefore, the kitchen should be cautious. It is very convenient to replace it.

 

 

 

2, bamboo fiber has a certain water absorption. If it is safe to reach the toilet, long-term blisters may be prone to problems.

 

 

 

3, pvc PVC will produce hydrogen chloride in a long time of light. Water is hydrochloric acid. Water is not very irritating to the respiratory tract. Now there is a pp film, but it is expensive compared to pvc.

 

 

 

I don't know how much release will it cause the wallboard to deteriorate after hydrogen chloride is produced?

 

 

 

As for the selection of bamboo fiber: one looks at the roughness of the cut fiber. The rougher the worse, then the color is black. It may be recycled material. The whitishness may be that the proportion of calcium powder is too high, so the wallboard is easy to be brittle. You can also smell it, the normal plate smells close to the nostrils, and there is a bamboo wood taste. Inferior plastic taste is very heavy.