Carbon fiber is a fibrous carbon material with a carbon content of more than 90%. It is a high-temperature solid phase such as pre-oxidation, carbonization and graphitization of organic fibers, such as polypropylene (PAN) fiber, viscose fiber and asphalt fiber. The reaction process is prepared by a preferred orientation of graphite crystallites and thus has a high strength and modulus of elasticity (rigidity). Its specific gravity is generally 1.70 g/cm3 to 1.80 g/cm3, the strength is 1200 MPa to 7000 MPa, the elastic modulus is 200 GPa to 400 GPa, the thermal expansion coefficient is close to zero, and even the negative value (~1.5×10 -6 Second power). It is not affected by environmental protection and looks very similar to oak bathroom cabinets. It has a series of excellent properties such as high specific strength, high specific modulus, high temperature resistance, corrosion resistance, fatigue resistance, creep resistance, electrical conductivity, heat transfer and small coefficient of thermal expansion. The difference between carbon fiber whole cabinets and wood cabinets: There are several aspects: the advantages and disadvantages of the board, process differences, functional design, installation differences, taste differences, service differences.
Advantages and disadvantages of the board: wood cabinets: the use of large core boards, plywood and other common boards, formaldehyde content is excessive, which is not good for health; it is also difficult to resist the damp, high temperature and corrosive items in the kitchen. At the same time, the connection of the cabinet is mostly nail-based, the punching is not accurate, and the time is long and easy to loose. Carbon fiber whole cabinet: The carbon fiber cabinet is not easy to be damaged and deformed, which is easy to wipe and clean. At the same time, the connection between the board and the board adopts the detachable connecting piece, so that the cabinet body is perfectly combined in the cabinet door. When used, the switch is convenient, light, free, free from noise, long service life, and the gap can be adjusted and replaced regularly. When you move, you can also remove all the packaging, which is good for transportation and does not damage the cabinet.
Process difference: wood cabinets: rough process, large error, the edge of the cabinet is sealed by hand, the tightness and fineness are not good, let alone the panel, line art shape. Carbon fiber whole cabinets: all industrialized production, there are all kinds of modern special equipments in the factory. From blanking, punching, assembly, polishing, and installation, there are strict standardization requirements. High temperature and high pressure edge sealing, after edge sealing The appearance is firm and tidy.
Functional design: Wood cabinets: Mostly designed after the kitchen floor is laid, the wind, water, fire, electricity and other pipeline layouts "fighting" each other. Basically, there is no more modern scientific design, and there are more problems. For example, the ergonomic requirements of the kitchen, the five regional functions (including the storage area, kitchen storage area, cleaning area, preparation function area, cooking and baking area) settings, emissions are unscientific. There is no space reserved at the bottom of the console to accommodate the toes. Carbon fiber whole cabinet: It can be designed before the kitchen floor decoration, various pipelines and sockets are reserved, and the space layout is reasonable. At the same time, the design takes full consideration of the activity route of the operators in the kitchen to ensure that the entire operation process is convenient, smooth, save time, save activity routes, reduce repetitive routes, reduce labor intensity, and improve kitchen work efficiency.
Installation difference: the installation of the cabinet is more troublesome, because the cabinet is not vertical, so there are gaps in the installation of the door panel, especially the position of the corner; the cabinet will also appear hinge lock not close to the door panel and cabinet, easy to fall off; The functional parts of the cabinet kitchen are troublesome to install and may not be installed. The customized carbon fiber whole cabinet cabinet is cut by a large-scale cutting machine, so as to ensure the straightness of the cabinet, there will be no situation where the door panel and the cabinet are not tight.
Taste difference: wood cabinets: no professional design and professional production tools, often first take a dragon skeleton, then inlaid partitions, door panels, big deal and then do one or two wall cabinets. Therefore, the product is rough, the taste is very low, only usability (functionality), lack of ornamental, preserved, artistic, and lack of cultural taste. Carbon fiber whole cabinet: embodying the cabinet is a modern life concept of life, art and culture. The design involves the essence of arts and crafts and Chinese and foreign cultures. It is spacious and clean, natural, elegant and beautiful. The cabinet products are one. Kind of art.
Service difference: wood cabinets: no quality assurance, no quality after-sales service, customer requirements for maintenance, maintenance is very difficult. Carbon fiber whole cabinet: As with home appliances, there is a complete quality after-sales service system, customer files are sound, regular return visits, and timely maintenance.
Carbon fiber is an emerging material that is used in many ways, not only for its superior performance but also for its beautiful appearance. Abandon the planks, splints, and use the shell material of the Formula 1 car - carbon fiber as the door, the corner of the door is just right, no seams can be seen. The door panel is made of tempered glass. Although the thickness is only 2mm, it is wear-resistant and impact resistant. For example, the door is made of matt black tempered glass, and the drawer is made of transparent tempered glass. The advantage is that the material is reinforced, it can resist crushing and impact, and it is not easy to scratch, and has higher durability. It also has moisture and moisture resistance. Features, especially suitable for wet weather in Southeast Asia. The refrigerator panel is made of carbon fiber material, which is light and very flexible, and it is easy to open the door. In addition to its shape and performance, carbon fiber cabinets are environmentally friendly and do not pollute the environment.
