Bamboo wood fiber integrated wall surface is a new type of environmental protection decoration material. For the problem of how to install the integrated wall surface, people who know how to do it are very simple. But the first contact with the carpenter may feel that there is no way to start. Integrated wall installation must be combined with the drawings to analyze, what to install first, what board is installed?

 

 

 

    Bamboo wood fiber integrated wall installation sequence: first top wall, first board back line, bottom to top, from the outside to the inside.

 

 

 

    First, the rear wall refers to the installation of the ceiling and then the installation of the wall. When installing the ceiling, the keel needs to be fixed first; the first integrated wall surface to be installed on the wall must be fastened to the wall with a buckle. After each installation, one side is fastened to the front integrated wall and the other side is fixed with steel nails. . Pay attention to the overall picture design during installation. You need to divide the line first and install it according to the pre-designed drawings. If you encounter the socket position, you need to leave the socket in advance.

 

 

 

    The first board and the back line refer to the installation of the main board first, then install the lines, first install in a large area, and then process the corners, the edges and other details. If you encounter a column, you can use the back slot to wrap the column.

 

 

 

    Bottom-up means that when installing a wall, you need to start from the bottom of the wall and gradually increase it until you install a complete wall.

 

 

 

    From the outside to the inside is the order from the wall of the room to the door. This is because the installation to the last part requires cutting, and the installation from the outside to the inside is more beautiful.

 

 

 

    On the whole, the integrated wall installation is very convenient and can be directly installed on the wall of the rough room, which can be completed by two woodworkers. If the wall is not flat, you need to level the wall before installation.